Ecoenergy Induction Lighting in Charlotte, NC

 
 
 
EcoEnergy Induction Lighting
Unlike fluorescents, EcoEnergy does not contain electrodes. This fact alone makes it outlive lamps using other technologies and create a huge impact on energy savings and reduced maintenance costs.
Ecoenergy Induction Lighting - Electrical Installation in Charlotte, NC
 
 
 
In addition, EcoEnergy provides:
Immediate, significant reduction in electricity costs of 40% to 60% over HID lamp sources
Longer operating life resulting in substantial reduction in maintenance costs
Faster lamp starting, instant re-strike
Improved color and visual appearance. Color rendering index of 80 Ra
No flickering, high frequency operation
Available in 40, 70, 100, 150 and 200W solutions
Environmentally friendly technology, less landfill waste
With an average rated life of 100,000 hours and very low lumen depreciation, EcoEnergy lamps provide an impressive savings in both materials and labor costs: by the time one EcoEnergy lamp has reached its end of life, an older metal halide lamp would have been changed 8 to 9 times. And sodium vapor lamps would have been replaced, on average, 4 to 5 times.
 
 
The environmental footprint of EcoEnergy means less harmful waste on landfills. Over the life of the EcoEnergy lighting system, a metal halide system would have contributed over 240 mg of mercury to the environment, as compared to 6 mg for induction.
Perhaps most impressive is EcoEnergy's watts per lumen feature. Not only does it consume less energy, but the light output is, literally, brighter.
Scotopic vs. photopic
Why do induction lights appear to be brighter even though a light meter may measure them as producing the same or even less light than conventional lamp? The reason is the contribution of scotopic vision (night vision) to the sensitivity of the eye. Scientific studies have shown the eye is more sensitive to blue wavelengths, the ones largely responsible for “visual acuity” or sharpness of vision. Simply put, induction lamps have a higher ratio of scotopic light (as compared with regular, photopic light). This ratio determines the apparent visual brightness of a light source, making the 100w induction lamp appear as bright or brighter to the human eye than a sodium vapor or metal halide of nearly twice the wattage.
 
 
Kumho Electric's electrode-less induction lighting leverages new technology developments to provide a high-efficiency, low-maintenance, long-term lighting solution. With a 100,000-hour rated life, EcoEnergy induction lamps are ideal for outdoor applications where re-lamping is expensive or cumbersome, as in parking lots, street lighting, tunnels, or indoors for high bay fixtures. Versatile mounting options make them the ideal choice for a variety of pole, ceiling and wall-mounted applications.
See how induction saves BIG $$
How do EcoEnergy Lamps
Save Energy?
Typical HID lighting has steep lumen depreciation curves, losing as much as half its initial light output by the time it reaches midlife. Econergy is manufactured with technology Kumho Electric developed for the back light panel display industry, which reduces lumen depreciation to less than 30% over the 100,000-hour life of the lamp. Since HID lamps tend to be over-designed, providing higher initial lumens to compensate for fast degradation, wattage is being wasted due to expected light loss. Econergy's high lumen maintenance levels make this over-compensation unnecessary.
In addition, EcoEnergy provides much higher level of luminous efficacy (lumen/watt) due to scotopic factors: high color temperature (K) combined with high color rendering index (CRI). The resulting clean, crisp white light is better to read, work and sell under. Colors are truer and merchandise looks real. This better visual acuity is achieved using less energy than with other, higher-wattage lamps.
Gradual, minimal light depreciation ensures predictable, uniform illumination over many years.
 
Slashing Maintenance Costs
Re-lamping outdoor or high-bay fixtures can be both costly and cumbersome, involving specialized equipment and maintenance crews. Since EcoEnergy lamps have a rated life of 100,00 or longer than 10 years(*), they can be expected to last four to five times longer than typical HID lamps. This means the frequency of replacement goes down to virtually zero. EcoEnergy induction lighting will pay for itself with energy and labor savings on spot replacement and re-lamping costs alone.
* assuming a burn rate of 12-14 hours a day
NOTES:
Four components make up the Eco Energy system: lamp, power coupler, heat sink and generator Approximate lumen values listed are for vertical operation of the lamp Mean lumens is the approximate output at 40% of rated average life
Unparalleled Warranty
The quality and durability of this product is so outstanding that Kumho Electric is offering the strongest, most comprehensive warranty program in the industry, (refer to Kumho Electric's warranty data sheet).
Induction Bulb Induction Graph
Features & Benefits
Very long life – 100,000 hours rated life translates to significant savings in maintenance costs
High lumen output – 2,800 initial lumens(40W lamp) to 11,250 initial lumens (150W lamp)
Range of input voltage – each lamp has the ability to operate on voltages ranging from 120 to 277
Gradual, minimal lumen depreciation – still at 70% luminosity at end of life means fewer replacements, more efficient lighting
Outstanding color rendering – CRI of 80 provides for vivid, natural colors Range of color temperatures – choice of warm or cool light for desired effect and particular applications
Stable output – relatively unaffected by fluctuations in line voltage, the Induction lamp output remains constant over wide ranges of inputs
Instant-ON capability – because it does not require warm-up time to come to full luminescence, it can be controlled by occupancy sensors to provide further energy savings
Hot and cold operation – performs on a wide range of environments –from -20° to 60°
No flickering or noise – a distraction-free option for indoor or outdoor applications
Low mercury – uses only 6 mgs of mercury,
a much more environmentally-friendly product than other alternatives
Product Comparison Chart
Econergy
High Press Sodium
Metal Halide
Pulse Start
Power consumption (W)
100W
150W
175W
150W
Luminous flux (Lm)
7,500
14,000
14,000
14,000
Luminous efficacy (Lm/W)
75
93.3
80
93.3
Color temperature (K)
3000-6500
2,000
4000-6500
4000-6500
Color rendering index (CRI)
80
28
65
65
Initial/re-start time
Instant
8~10min
8~10min
3~4min
Set weight
1kg
6kg
6kg
6kg
Heated temperature
100 C
300~400 C
300~400 C
300~400 C
Lumen depreciation
Slow
Medium
Fast
Fast
Average rated life hours
100,000
24,000
10,000
10,000
Mercury content
6 mg
30 mg
30 mg
30 mg
Specifications
Description
Order
Code
Watts (W)
Input
Voltage (V)
Average
Rated Life (Hrs)
Lumens (Lm)
Color Temp
Kelvin (K)
CRI
Econergy 40W
101504
40
120 – 277
100,000
2,800
5000
80
Econergy 70W
101507
70
120 – 277
100,000
5,250
5000
80
Econergy 100W
101510
100
120 – 277
100,000
7,500
5000
80
Econergy 150W
101515
150
120 – 277
100,000
11,250
5000
80
Econergy 200W
101520
200
120 – 277
100,000
15,000
5000
80
continued…
Description
Luminous
Flux (Lm)
Luminous
Efficacy (Lm/W)
(Calculated Value)
Luminous
Efficacy (Lm/W)
(Tested Value)
Operating
Temp
MOL (in)
Lamp Height
[mm]
MOL (in)
Heat Sink
Height [mm]
Econergy 40W
2,400
<70
63~64
Less than 60°C
152
min 15
Econergy 70W
4,900
<75
70~72
Less than 60°C
180
min 15
Econergy 100W
7,500
<75
72~74
Less than 60°C
207
min 20
Econergy 150W
10,500
<75
72~74
Less than 60°C
230
min 30
Econergy 200W
14,000
<75
72~74
Less than 60°C
241
min 22
Dimensions [Units : mm]
40W
70W
100W
150W
200W
A
58.0
58.0
58.0
67.0
94
B
45.5
45.5
45.5
55.0
70.4
C
52.0
52.0
52.0
62.0
78.5
D
100.0±2.0
128±2.0
155.0±2.0
168±2.0
168±2.0
E
152.0±2.0
180.0±2.0
207.0±2.0
230±2.0
240±2.0
F
85.0
110.0
130.0
140.0
149
G
20
20
25
30
22
H
108
108
108
108
105
I
113
113
141
192
199
J
99
99
127
175
185
K
45
54
54
54
52.5
 
Induction
New induction lighting makes a BIG difference . . .
THE PROJECT: Working with Graybar electric distributor, Kumho Electric provided lighting fixture retrofit kits and induction lamps to retrofit high bay lighting in a major Midwest automotive manufacturing facility.
DETAILS: Project retrofitted 2095 high-bay fixtures, replacing 250W Metal Halide lamps with 150W Kumho Electric induction lamps.
induction cast study
. . . in workplace appearance and functionality
Note the yellow cast (color temperature) of the metal halide lighting in the “Before” photo. New induction lamps, provide better color rendering and brighter, clearer illumination.
. . . in energy use and electric bill savings
The retrofit cuts energy consumption almost in half with a net energy savings of about 133W per fixture or almost 300,000 watts for the plant.
. . . and in long-term cost reductions
With a rated life of 100,000 hours — more than five times longer than metal halide — Kumho's induction lamps virtually eliminate re-lamping and lighting maintenance for over 20 years!
1st year electric bill savings: $145,000
ROI Payback: 1.71 years
Life Cycle Savings
 
Savings Maintenance
$1,523,756.35
 
Energy
$3,972,009.31
 
Total
$5,495,765.66